Production Works >> Pre-Loved Equipment Sales

E X R E N T A L S T O C K
DN3600 Programmable Graphic Equalization System

System Includes:

6 x DN3600 Dual Channel, Third Octave Graphic Equaliser

1 x DN3698 Hand Held Remote Controller

1 x DN3603 Docking Station for DN3698 Hand Held Remote

1 x DNWS01 Wireless Link for DN3698 HHR and Docking Station

DN3600 Dual Channel, Third Octave Graphic Equaliser

Click on image to enlarge

•	Tuneable notches and sweepable low and high pass filters.
•	Large, backlit Supertwist LCD display with virtual fader and actual curve display modes.
•	30 Tactile switches for instant access to virtual faders.
•	DN360 and DN27 emulations with Klark Teknik's proprietary combining filter characteristics.
•	Auto gain-ranging to maintain headroom.
•	66 Memories for EQ settings.
•	Soft crossfade between memories.

•	Ability to address up to 64 slave units.
•	Pro MIDI interface for Master/Slave setups and system exclusive bulk dumps.
•	Revised MELT hybrid filter circuits give exceptional headroom and dynamic range.
•	10-Segment bar graph level meters plus clip warning monitoring the signal at 7 different points.
•	Inputs and outputs electronically balanced-transformer balancing is an option.
•	Fail-safe relay bypass.

Technical Specifications
Input	Two
Type	Electronically balanced (pin 2 hot)
Impedance (ohms)
Balanced	20k
Unbalanced	10k
Max level	+22dBu

Output	One
Type	Electronically balanced (pin 2 hot)
Min. load impedance	600 (ohms)
Source impedance	50 (ohms)
Max. level	+22dBu into 2k ohms or higher

Performance
Frequency response
Eq Flat	+/- 0.5dB (20Hz to 20kHz)
Distortion (@ + 4dBu)	<0.01% @ 1kHz
Equivalent input noise
(20Hz-20kHz unweighted)	<-95dBu
Overload indicator	+19dBu
Gain	Mute, -18 to +6dB

DN3698 Hand Held Remote Controller

Click on image to enlarge

•	Hand held remote control of up to 49 DN3600 and DN3601 units, i.e. 98 mixes.
•	Full access to all DN3600 functions, including memory store/recall and curve display.
•	Backlit 480 x 64 dot matrix LCD display with full width fader graphics and windowed functions.
•	One button per function operation.
•	Dual thumb wheel encoders for frequency and level with interactive LED ladders.
•	Fast selection of individual channels (mixes).

•	LED indication of selected “mix” and memory number.
•	Battery operation. Battery life: 5 hours on one charge. Recharge time: 2 hours.
•	Separate “Battery Low” and “Recharge now” indicators.
•	Standard connection directly into the Pro-MIDI loop.
•	Optional rack mounted docking station for protective storage and single wire operation.
•	Optional purpose designed radio link for wireless operation.

Dn3603 Docking Station for DN3698 Hand Held Remote

Click on image to enlarge

•	2U rack storage for DN3698 Hand Held Remote controller.
•	Intelligent RS232 to MIDI conversion for DN3698 operation over a single 5-core cable.
•	Front panel 5-pin connection for DN3698.
•	Rear panel Pro-MIDI XLR connectors.
•	Continual charge of DN3698 batteries.
•	Power off bypass relay for MIDI connections.

•	Archives all DN3600 current settings.
•	MIDI data dump of all DN3600 settings.
•	Supports Klark Teknik WS01 wireless link for cable free operation of DN3698.
•	Internal voltage sensing switch mode power supply.

DNWS01 Wireless Link for DN3698 HHR and Docking Station

Click on image to enlarge

•	True bi-directional wireless connection of DN3698 and Docking Station.
•	Range of up to 100m in open space.
•	Powered from DN3698 and Docking Station - no separate batteries required.

•	Error checking of all data.
•	Addressing on two channels.
•	Availability of two frequencies allows approved operation in most territories.

Last updated on Tuesday October 19, 2004

Top of Page